Features Fast, Reliable & Secure Wireless Signaling The Dual Path SEM sends alarms and system events over both the LTE cellular network and Broadband Ethernet connection to ensure fast, reliable, and secure communication. A landline phone connection is not required. Remote Monitoring & Control via Web/Mobile Operation of the SEM from the Alarm.com web and mobile interface is simple and allows system access at any time, from any location. Web features from Alarm.com include viewing system and sensor status/history, arming and disarming the system, setting up and managing user codes, and creating customized e-mail and text message notifications for any type of alarm or non-alarm activity at the property. Home Automation & Energy Management Alarm.com’s automation and energy management services allow remote control of Z-Wave devices through web and mobile interfaces. Rules can be created to leverage the entire system of connected devices and security sensors. No Separate Power Supply Needed The SEM does not require its own battery or transformer. It runs on the control panel’s AC power and backup battery sources and can function reliably for more than 24 hours during a power outage. Specifications Compatibility DSC PowerSeries PC1616, PC1832 and PC1864 version 4.2 or newer Power Requirements 12 V nominal, 130 mA (continuous) 2000 mA (instantaneous peaks) maximum (from panel battery) Cellular Network Dual Band 4G LTE Panel Interfaces Three keypad bus connections 12V power and ground to panel battery Alarm.com Module Indicators One module/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs SEM Circuit Board Indicators One LAN LED, one processor LED, one COMM fail LED Z-Wave Frequency 908.4 MHz Operating Temperature 32 to 120°F (0 to 49°C) Storage Temperature -30 to 140°F (-34 to 60°C) Humidity 90% relative humidity non-condensing Enclosure Dimensions (L x W x D) 7.5 x 4.25 x 1.5” (19.05 x 11.43 x 3.81 cm) Case Material High-impact, ABS plastic